I will be moving from PC to Mac, but will need to run a Windows application that uses a serial port, using boot camp. Would I be right in thinking I would need to install this adapter under Windows using a Windows driver?
Hi Doug,If you have the Plugable adapter, the latest driver for OS X is properly signed and there is no need to turn off SIP in order to install it. If you are having problems getting it installed, please contact us at support@plugable.com and we can help.
D-tech Usb 2.0 To Serial Adapter Driver
Download File: https://adit0dapo.blogspot.com/?an=2vJbnA
David, thanks for the response, I should start at the beginning, I have an older Cables 2 Go USB2Serial cable and my research indicated that the driver I needed was this one. It works on a windows PC but since I use a MAC most of the time I was trying to get it to work. However, I have since ordered a plugable adapter and I think it should be here today and I am sure that will solve my problem. I will keep you posted.
Description Maximum Compatibility Connect to any Serial / RS232 device that you want to connect to the USB port of your computer. We proudly boast about our 100% device compatibility ratio with this product! Who currently uses this product? We have sold this USB to Serial Adapter Cable mainly colleges, Audio / Visual Centers, as well as some Audio / Visual manufacturers. This cable will integrate flawlessly with all of the serial applications available. Other brands of USB to Serial Adapters that are comparable in quality, compatibility and reliability, such as Keyspan's are being sold by many audio visual manufacturers for at least $40-$50. Compatible with all Serial PDA's This is also compatible with all PDA cradles or cables that use a serial connector. Easy SetupS232 Setup is quick and easy. Just plug it in, pop in the driver disk, and be done within a minute or two. USB to RS232 What's included
By converting a USB Connection to a DB9 Serial Connection, with the USB serial adapter you can make use of older equipment that still relies on a DB9 Serial Connection so there is no need to worry about upgrading to newer equipment.
The USB to RS-232 Serial Adapter provides an external plug & play RS-232 serial connection with your computer, letting you free up your existing serial port. With USB to serial 9 pin female converter, Users have the capability to utilize the adapter with serial port interface in an easy-to-use environment.
For most of these operating systems two types of driver are available: Virtual COM Port (VCP) drivers and direct (D2XX) drivers. The VCP driver emulates a standard PC serial port such that the USB device may be communicated with as a standard RS232 device. The D2XX driver allows direct access to a USB device via a DLL interface.
We use the Silicon Labs CP2102 USB-to-UART Bridge Controller in several of our products to provide USB connectivity while communicating via a simple serial protocol. It is the key component of our Pololu USB-to-serial adapter:
Recent versions of the linux kernel include support for the CP2102 USB-to-UART Bridge Controller as part of the usb-serial driver, so your Pololu CP2102 should work right out of the box. We have verified that the CP2102 works with Ubuntu versions 7.04 and 8.04. If you experience any problems, we recommend you upgrade to the most recent version of your distribution.
You can check multiple ports at the same time by opening multiple sessions, putting the loopback adapter on one port, and trying to type into each session. When you can see what you are typing, you know that the COM port is working and you can see which port number the physical serial port is. Close the window for the port that you just tested to speed up the testing of the remaining serial ports.
Guaranteed CompatibilityWindows 7 Compatible 32-bit and 64-bitFully Serial / RS232 compatibleWe proudly boast about our 99% device compatibility ratio with this product! We also stand behind it. You may see others that look like ours, but ours comes with a driver for Windows 7, 32-bit as well as 64-bit.Commercial qualityOur USB to Serial Adapter Cable is used mainly by AV pros and other industrial techs. This cable works great to add a serial port to your new laptop that didn't come with one, and will allow you to work on equipment just like you used to with your old laptop. Easy SetupSetup is quick and easy. Just plug it in, pop in the driver disk, and be done within a minute or two. We've also included driver downloads on our site in case you want to try those with your current non-functioning adapter.Getting a Code 10 Error on your USB to Serial device? You don't have the correct driver chosen. You'll need to choose the 2008 driver, version 3.3.2.102 to correct the problem. Download the correct version below. If you purchased it from us, you can use our toll free tech support. We're native English speakers and are here Monday-Friday.DownloadsHow to fix a Code 10 ErrorWindows 7 Drivers, 32bit and 64bit (Latest Drivers)Windows XP Drivers (Latest Drivers)Mac Drivers (Latest Drivers)Prolific drivers site2009 VersionVista DriversWindows Drivers 2007 versionWindows Drivers 2003 versionMac DriversMac OS 10.3 DriversLinux DriversManual
On Alibaba.com, you can contact international telecommunication equipment suppliers. Find wholesale dtech usb 2.0 to serial rs232 adapter and other telecommunication systems, devices, and accessories.
Easily add an RS-232 9-pin serial port to any computer with our PL2303-DB9 USB to Serial Adapter!This adapter will let you connect older serial devices to modern computers, for terminal services, data transferring, remote control, and programming. Supports baud rates from 75bps to 12Mbps, multiple stop bit and parity types.
Plugable's USB to Serial Adapter features Prolific's PL-2303HX Rev D chip for the best combination of support and performance with a wide range of RS-232 serial devices. Drivers are built-into Windows 11, 10, 8.x, 7, and most Linux distributions, drivers are available for Windows XP, Vista, and macOS.
This adapter replaces a legacy built-in or PCI serial port and features a fixed male port with screw in connection. For connecting devices that also have a male connector an inexpensive DB9 coupler or standard serial cable can be purchased separately.
Works with devices with RS-232 serial ports such as other PCs with RS-232 ports, Bluetooth serial adapters, telescopes, amateur radio gear, GPS receivers, routers, firewalls, modems, plotters, embedded character displays, scan tools, sonar units, embedded boards and many others. Specific devices include: Garmin eTrex GPS, Seiko Label Printer, iRobot Create, Cisco products with serial consoles, US Robotics Modems, NexStar telescopes, Equus Scan Tools, Uniden Hand Held Scanners, etc. Works with software like: HyperTerminal, TeraTerm, WinDBG, all open source serial software on Linux, etc.
We use only genuine Prolific serial chipsets in our adapter. Some inexpensive serial adapters use cloned Prolific serial chipsets that will not work with the latest Prolific drivers, both those available for download and the drivers embedded in Windows. Because we only use genuine Prolific chips, our adapter is always compatible with the latest drivers from Prolific.
Following the installation instructions provided by the manufacturer of your serial devices, install any needed software or drivers. Connect the serial device to the adapter, and make any needed settings, such as COM port, baud rate, flow control, stop bits, etc.
The Plugable USB serial adapter allows you to connect legacy devices that use RS232 serial communications to computers that do not have a serial port. Although this usually works well, a number of problems can crop up because many of the devices people want to connect are older devices with various issues. A frequent problem is that the software that is necessary to connect to the device does not work under modern operating systems such as Windows 7 or above. Other problems can include using an improper cable, incorrect port settings, or a basic incompatibility between the Plugable USB serial adapter and the device it is being connected to.
In Windows, serial communications proceed through a COM port that is assigned by Windows when the USB serial adapter is plugged in. You can find out this COM port by opening Device Manager, going to Ports (COM & LTPT) and looking for Prolific USB-to_Serial Comm Port (COM#). The # symbol represents the port number of the COM port assigned by Windows. This port must be set correctly in whatever application is trying to communicate through that port.
More All Messages By This Member
displayLikeStats("/g/7j1", 0, 163496283, false) Steve Gregory $('#timedispmsg163508273').replaceWith(DisplayShortTime(1586787861985273573, false)); #12 yes any serial dongle will workI use the rc2000 software-- Steve GregoryBroadcast Technician (Contractor)Western DistrictMobile: +61 0410006899mail: steve.gregory.fim@...IMPORTANT This email and any attachments are confidential and legally privileged.Please notify me if you have received this message in error, and remove it from your system. Unauthorised action is prohibited under Australian Federal Cyber Security Laws. More All Messages By This Member
displayLikeStats("/g/7j1", 0, 163508273, false) flyguystudy@... $('#timedispmsg163605571').replaceWith(DisplayShortTime(1586918308417585842, false)); #13 Dear Steve,Thanks very much for your comment.Unfortunately for me, I've discovered that not all USB - Serial Cable dongles work. (in my case, a DTech USB to RS-232 DB9 female claimed to contain a real Prolific PL2303 chip but, in fact, it was a fake PL2303 and the various drivers do not work).The net effect of this is, the cable and the COM/LPT port is recognized by my W10 laptop but, due to the lack of Prolific (Taiwan) driver support for the pirated chip, the laptop is unable to see the TS-2000 transceiver.Besides controlling the rig, one goal of mine is to update my firmware. This is impossible without being able to communicate with the transceiver. I definitely do not want to "brick" my rig.Sadly, I discovered a substantial amount of documentation on this incompatibility AFTER purchasing the knockoff cable.Considering the number of older Kenwood transceivers out there, my hope was that there might be some genuine cables, or cable components, available.I'm still open to additional ideas...-- 73,J.D.JJ1NJMNarita More All Messages By This Member
displayLikeStats("/g/7j1", 0, 163605571, false) ve7ha2002 $('#timedispmsg168419742').replaceWith(DisplayShortTime(1593596416893227307, false)); #23 Edited $('#timedispmsg168419742').replaceWith(DisplayShortTime(1593596671739918968, false)); What version Windows are you using? I just purchased one of these via ebay for use with Windows 10 to use with my TS-950SDX. You can source from ebay or similar these cables. It cost US$7.80 shipped from New York to Canada. But you must get the cable with chipset compatible with Windows 8 or later if using those operating systems. Be sure the ad specifically says the cable is compatible with the operating system you use. If the cable is legitimate, then no driver disk is necessary in this case since Windows will recognize a compatible cable immediately when you plug it in. If using Windows 7 or earlier, then you should get a driver disk with the cable.MurrayVA1CQ / 7J1AQH More All Messages By This Member
displayLikeStats("/g/7j1", 0, 168419742, false) flyguystudy@... $('#timedispmsg168520131').replaceWith(DisplayShortTime(1593745779409004523, false)); #24 Hi Murray,Thanks for your input and suggestions.The Prolific PL2303 chipped knock-off USB to RS-232 Serial cable made by D-Tech did work with Windows 10, however, did NOT communicate with (nor recognize) the transceiver.I have since acquired a FTDI chipped USB - RS232 cable and the transceiver was immediately recognized. I subsequently upgraded the firmware using the established procedure and everything went flawlessly. Granted, the time required to write the firmware was shockingly long (about 7 minutes) but it worked. If anyone needs help with this, please let me know.-- 73,J.D.JJ1NJMNarita More All Messages By This Member
displayLikeStats("/g/7j1", 0, 168520131, false) Close Verify Delete Are you sure you wish to delete this message from the message archives of 7j1@groups.io? This cannot be undone. Cancel Yes Close Verify Repost Are you sure you wish to repost this message? Cancel Yes CloseReport MessageReasonReport to ModeratorsI think this message isn't appropriate for our group. The Group moderators are responsible for maintaining their community and can address these issues.Report to Groups.io SupportI think this violates the Terms of Service. This includes: harm to minors, violence or threats, harassment or privacy invasion, impersonation or misrepresentation, fraud or phishing.Note:Your email address is included with the abuse report. 2ff7e9595c
Comments